At first, you need to scan the Enter Setup barcode can enable the engine to enter the setup mode. Then you can scan a number of programming barcodes to configure your engine. Finally, to exit the setup mode, scan the Exit Setup barcode or a non-programing barcode, or reboot the engine.
Enter Setup (default)
Exit Setup
LED Illumination
Normal (default): LED on engine are turned on during image capture.
Always on: Illumination LED on the engine keep on after the engine is powered on.
Always off: Illumination LED on the engine are off all the time.
Normal (default)
Always on
Always off
Post time: Feb-14-2022